hi
i tryed to downgrade from the new rogero 4.30 v2.3 i followed this steps,now my ps 3 has green light on,hdd led working for like 10-15 sec then nothing,no video!any help?
- Downgrading back to 3.55 is always possible using the following steps :
- Download the 4.25 downgrader PUP ---> 4.25 Downgrader mirror ---> 4.25 Downgrader
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.
- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:
1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):
L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.
- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" again for the second time (from Recovery Menu, this is important)
( Installing "Rogero CEX-3.55 CFW V3.7" twice from Recovery will make sure to fill both "ros0/ros1" with ver3.55
to prevent any possible Brick after updating to other CFWs ).
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21
i tryed to downgrade from the new rogero 4.30 v2.3 i followed this steps,now my ps 3 has green light on,hdd led working for like 10-15 sec then nothing,no video!any help?
- Downgrading back to 3.55 is always possible using the following steps :
- Download the 4.25 downgrader PUP ---> 4.25 Downgrader mirror ---> 4.25 Downgrader
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.
- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:
1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):
L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.
- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" again for the second time (from Recovery Menu, this is important)
( Installing "Rogero CEX-3.55 CFW V3.7" twice from Recovery will make sure to fill both "ros0/ros1" with ver3.55
to prevent any possible Brick after updating to other CFWs ).
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21