Hi, yesterday i got a ps3 fat as a gift.. its a sem-001.
I got it, because a friend from me tried to downgrade, but the ps3 was not booting after infectus install... ok, i´ve seen that he cut the right vcc and gnd pins from Nand 1(Bottom) i´ve scratched the nand and soldered cables to the pins. Now the Nand has VCC and GND from both sides!! Sometimes the PS3 is booting and sometimes not!! Its like 100/1.
I´ve checked the Fuse F6002 it has 0.2-0.35 Ohm when the PS3 is off and on both sides 12V, both Nands are getting 3.3V so everything seems okay.. and the PS3 was not flashed!!!!!!! ALSO when the PS3 is off, Ohm between VCC and VSS is 385Ohm.
Any ideas??
Hope for help and sorry for my bad english
I got it, because a friend from me tried to downgrade, but the ps3 was not booting after infectus install... ok, i´ve seen that he cut the right vcc and gnd pins from Nand 1(Bottom) i´ve scratched the nand and soldered cables to the pins. Now the Nand has VCC and GND from both sides!! Sometimes the PS3 is booting and sometimes not!! Its like 100/1.
I´ve checked the Fuse F6002 it has 0.2-0.35 Ohm when the PS3 is off and on both sides 12V, both Nands are getting 3.3V so everything seems okay.. and the PS3 was not flashed!!!!!!! ALSO when the PS3 is off, Ohm between VCC and VSS is 385Ohm.
Any ideas??
Hope for help and sorry for my bad english