Member ViPeR from PS3-Tools.de has found a Method to install any FW so it claims here: http://www.ps3-tools.de/thread.php?t...21d285cd01dfa2
Google Translation:
Google Translation:
Click here to see full text
by ViPER for PS3 Tools.de
Downgrade PS3 with a difference .... !
Firmware downgrade without data loss WITH & WITHOUT the E3 flasher or a JIG dongle, without a lot of action ... almost better not get any.
The following method I found out by accident because I was careless with my own instructions. big grin
[Tutorial for Beginners] E3 NOR Flasher from A - Z
There were various consoles were downgradebar to FW 2.20 / 2.60 / 3.40 / 350 tested.
WHAT IS NECESSARY IN ORDER TO THIS METHOD ONE IS POSSIBLE DOWNGRADE?
- A PS3 at a downgrade to 3.40-od / 3:41 feasible to 3.50
- A retail disc with firmware 3.40 / 3:41 or the 3:50
or
- A BURNT disc with firmware 3.40 / 3:41 or the 3:50
(The Ordnerstrucktur the burned disc must be PS3/UPDATE/PS3UPDAT.PUP =!)
WHAT MUST BE THE SUCCESS OF THIS WAY BE INSTALLED? The Toggle QA flag must be set (see installation spoiler)
Spoiler
The ToggleQA.pkg via USB stick install (DL is a little further down) and 1 x Run (It should never insert anything into the USB ports.)
The PS3 will beep 3 times and returns to the PS3 menu, the PS3 cursor to "Network Setting" navigate.
Enter QA-Flag/Toggle QA key combo for the Debug Settings "Pad_L1 Pad_L2 + + + Pad_L3 Pad_R1 + + Pad_R2 Pad_unten (or Pad_links)
nice slowly pushing one button after the other and hold.
Been successfully activated the Debug Settings now are additional menu items
"Edy Viewer", "Debug Settings" & "Install Package" selectable.
Now in the debug setting can select Debug Update: ON getellt be to downgrade without JIG dongle.
WHAT DOES THIS METHOD WITH CFW?
Currently with ANY NoCheck patched firmware!
BY WHICH SAW WORKS THIS WAY?
In conjunction with the E3 Flasher and a patched backup with ALL!
DOWNGRADE BY E3 FLASHER (without JiG dongle) (This applies for OFW / CFW NOT the NoCheck besitzten)
Downgrade WITHOUT JiG dongle OFW (including current 4.30 CFW's)
- Disk is already in the drive
- Backup NOR patch and make
- Backup over FlashFun play again (SBE Must be soldered)
- There should be nothing connected to the USB CONNECTION except the JoyPad
- Run in the PS3 recovery menu go and point 6
- The PS3 checks the disc drive and the Down Guard starts (in my case 3.40) big grin
- We are on OFW 3.40 and can go from there on to any OFW / CFW how we want big grin
DOWNGRADE WITHOUT E3 FLASHER & WITHOUT DONGLE JIG (A-E3 flasher can be installed, as it is only with NoCecks FWs)
ONLY WORKS FOR AN CFW's NoCheck PATCH HAVE!
- Insert Disk
- Recovery menu items 6 select and execute
- Finished big grin
- Select Again on recovery menu items 6 and run (for safety)
WHY IS NO DONGLE JIG USED?
A guess of mine is that a JiG DONGLE also there is that you can downgrade using a USB stick.
THIS GUIDE IS ONLY WITH THE DISK DRIVE!
Were inter alia on the E3 Flasher Single & Dual Boot tested.
The dual boot works on the PS3 at the E3 NOR and NAND.
The dual-boot installed on the E3 NOR he must then be copied to the PS3 NOR.
Important least once the Toggle QA installed a CFW and have to be enabled,
This method has nothing to do with it, like an OFW console ect> 3:55 or the 3:41. is downgraded, it still is additional hardware required!
PS3 Tools.de & I assume no liability for any damages that could occur when used incorrectly.
The users assume all responsibility and do everything on your own risk!
Tutorial created by ViPER
Downgrade PS3 with a difference .... !
Firmware downgrade without data loss WITH & WITHOUT the E3 flasher or a JIG dongle, without a lot of action ... almost better not get any.
The following method I found out by accident because I was careless with my own instructions. big grin
[Tutorial for Beginners] E3 NOR Flasher from A - Z
There were various consoles were downgradebar to FW 2.20 / 2.60 / 3.40 / 350 tested.
WHAT IS NECESSARY IN ORDER TO THIS METHOD ONE IS POSSIBLE DOWNGRADE?
- A PS3 at a downgrade to 3.40-od / 3:41 feasible to 3.50
- A retail disc with firmware 3.40 / 3:41 or the 3:50
or
- A BURNT disc with firmware 3.40 / 3:41 or the 3:50
(The Ordnerstrucktur the burned disc must be PS3/UPDATE/PS3UPDAT.PUP =!)
WHAT MUST BE THE SUCCESS OF THIS WAY BE INSTALLED? The Toggle QA flag must be set (see installation spoiler)
Spoiler
The ToggleQA.pkg via USB stick install (DL is a little further down) and 1 x Run (It should never insert anything into the USB ports.)
The PS3 will beep 3 times and returns to the PS3 menu, the PS3 cursor to "Network Setting" navigate.
Enter QA-Flag/Toggle QA key combo for the Debug Settings "Pad_L1 Pad_L2 + + + Pad_L3 Pad_R1 + + Pad_R2 Pad_unten (or Pad_links)
nice slowly pushing one button after the other and hold.
Been successfully activated the Debug Settings now are additional menu items
"Edy Viewer", "Debug Settings" & "Install Package" selectable.
Now in the debug setting can select Debug Update: ON getellt be to downgrade without JIG dongle.
WHAT DOES THIS METHOD WITH CFW?
Currently with ANY NoCheck patched firmware!
BY WHICH SAW WORKS THIS WAY?
In conjunction with the E3 Flasher and a patched backup with ALL!
DOWNGRADE BY E3 FLASHER (without JiG dongle) (This applies for OFW / CFW NOT the NoCheck besitzten)
Downgrade WITHOUT JiG dongle OFW (including current 4.30 CFW's)
- Disk is already in the drive
- Backup NOR patch and make
- Backup over FlashFun play again (SBE Must be soldered)
- There should be nothing connected to the USB CONNECTION except the JoyPad
- Run in the PS3 recovery menu go and point 6
- The PS3 checks the disc drive and the Down Guard starts (in my case 3.40) big grin
- We are on OFW 3.40 and can go from there on to any OFW / CFW how we want big grin
DOWNGRADE WITHOUT E3 FLASHER & WITHOUT DONGLE JIG (A-E3 flasher can be installed, as it is only with NoCecks FWs)
ONLY WORKS FOR AN CFW's NoCheck PATCH HAVE!
- Insert Disk
- Recovery menu items 6 select and execute
- Finished big grin
- Select Again on recovery menu items 6 and run (for safety)
WHY IS NO DONGLE JIG USED?
A guess of mine is that a JiG DONGLE also there is that you can downgrade using a USB stick.
THIS GUIDE IS ONLY WITH THE DISK DRIVE!
Were inter alia on the E3 Flasher Single & Dual Boot tested.
The dual boot works on the PS3 at the E3 NOR and NAND.
The dual-boot installed on the E3 NOR he must then be copied to the PS3 NOR.
Important least once the Toggle QA installed a CFW and have to be enabled,
This method has nothing to do with it, like an OFW console ect> 3:55 or the 3:41. is downgraded, it still is additional hardware required!
PS3 Tools.de & I assume no liability for any damages that could occur when used incorrectly.
The users assume all responsibility and do everything on your own risk!
Tutorial created by ViPER